Table of Contents
Advertisement
General Information
Before You Begin
Before proceeding with the disassembly procedure, make sure that you do the following:
1.
Turn off the power to the system and all peripherals.
2.
Unplug the AC adapter and all power and signal cables from the system.
3.
Remove the battery pack.
NOTE: TravelMate 540 series product uses mylar or tape to fasten the FFC/FPC/connectors/cable, you may
need to tear the tape or mylar before you disconnect different FFC/FPC/connectors.
NOTE: If you are disassembling a wireless unit, please remove the two screws that secure the mini PCI cover.
Then disconnect the wireless antennas before you detach the entire LCD module.
50
Chapter 3
Advertisement
Table of Contents
