Tesla X Owner's Manual page 93

• Bumper Clearance: Set the distance that you want Summon to stop from a detected object.
For example, you may want Summon to stop within just a few inches of the garage wall. This
distance applies only to objects detected directly in front of (when moving forward) or behind
(when reversing) Model X.
• Summon Distance: Specify the distance Model X travels when backing out of a parking space.
• Side Clearance: Allow Model X to enter and exit very narrow parking spaces.
Warning: Parking in a narrow space limits the ability of the sensors to accurately detect
the location of obstacles, increasing the risk of damage to Model X and/or surrounding
objects.
• Require Continuous Press (U.S. Only): By default, Summon requires that you press and hold a
button on the mobile app to move the vehicle during the parking process. When you set
Require Continuous Press to NO, you can:
• Park Model X by simply double pressing the Park gear, specifying the direction on the
touchscreen (if reversing), then exiting the vehicle.
• Park or retrieve Model X with a single touch of a button on the mobile app.
• Use Auto HomeLink: Set to ON if you want to activate HomeLink to open/close a
programmed HomeLink device (such as a garage door) during the parking process. If enabled,
the selected HomeLink device automatically opens and closes when Model X enters or exits.
Note: This setting automatically opens and closes the HomeLink device only when using
Summon. To automate HomeLink in other situations (such as when driving), you must access
the HomeLink device's main settings by touching Controls > Settings > HomeLink (see
HomeLink ®
Note: All settings associated with Summon are retained until you manually change them.
Position the Vehicle for Parking
Before operating Summon, align Model X laterally with the parking space so Model X can move
straight into the space in either Drive or Reverse. You must also position Model X within 39 feet
(12 meters) of the parking space (the maximum distance that Summon can move Model X).
If applicable, open your garage door (as described above, this can be automated using
HomeLink).
Note: Use Summon on flat driveways only where a raised concrete edge does not exceed
approximately 1" (2.5 cm).
Operating Summon with the Mobile App
On the mobile app, start Summon and hold down the forward or reverse button to move Model X
into the parking space. (U.S. Only): If Require Continuous Press is set to NO (see
Summon on page 90), you do not need to hold down the button, just touch and release.
Summon shifts Model X into Drive or Reverse (based on the direction you specified) and drives
into the parking space.
Initiate Automatic Parking Before Exiting the Vehicle (U.S. Only)
If Require Continuous Press is set to NO, you can initiate the parking maneuver from inside
Model X before exiting:
1. While sitting in Model X with the vehicle powered on, double press the Park gear.
The instrument panel displays a message indicating that Summon is engaged and the
touchscreen displays a popup window. The default direction is for Model X to move forward
into the parking space. Touch Reverse if you want Model X to back into the parking space.
2. Exit Model X and close the door.
Note: All doors and trunks must be closed.
Note: To cancel the parking maneuver before exiting the vehicle, touch Cancel on the popup
window.
Driver Assistance
Universal Transceiver on page 132).
Autopark
Customizing
91