Usb Ports - AEG SR 4357 BT Instruction Manual

English
38
NOTE:
• To ensure an optimal connection, make sure that the
battery of your player is completely charged.
• Some of the mobile phone brands have an energy-sav-
ing mode. Deactivate the energy-saving mode as it can
otherwise result in problems during the data transfer
through Bluetooth.
• To be able to transfer audio data, Bluetooth needs to
stay activated in your player. Observe the operation
manual of your player.
• If a mobile phone on which you are playing music
receives a call, the music will be interrupted. However,
the sound is not played back by the device. After you
have ended the call, the devices are connected to each
other again and playback continues.

USB ports

The device has two USB ports. Music files may be played
through one port, and you may use the second one to
charge your smartphone.
Playing music via USB (13)
This device has been developed in line with the latest techni-
cal advances in the USB field. The wide range of different
USB storage devices of all types which are currently on the
market, unfortunately do not allow us to guarantee full com-
patibility with all USB storage devices. For this reason, in rare
cases there may be problems in playing back files from USB
storage devices. This is not a malfunction of the device.
1. Press the POWER/SOURCE button (11) repeatedly until
"USB" is shown on the display.
2. Connect a USB storage device directly into the port.
Playback will automatically start after a few seconds.
For operation, please refer to the section "Description of the
control buttons".
NOTE:
• Always directly connect a USB storage medium to the
USB port to prevent any malfunctions.
• The USB port is not designed for charging external
devices.
CAUTION:
Switch the device to a different operating mode before you
remove the USB storage device.
USB charging port (5)
You may use this port to charge your smartphone. The device
will provide 1 A during operation with the mains cable. Use
the USB cable of your smartphone for the connection.
NOTE:
• Due to the different types of smartphones offered
nowadays, and their different charging capacities, the
charging duration depends on the smartphone used
and its operating condition.
• Playback of audio files through this port is not possible.
Description of the control buttons
NOTE:
Not all the functions may be supported depending on the
playback device.
PLAY/PAUSE (10)
You can briefly interrupt and resume playback using this but-
ton. The symbol " " will flash in the display. Pressing again
continues playback.
SKIP+/SKIP- (6)
With SKIP+ you can jump to the next or previous track etc.
• If the button is kept pressed down, the machine starts to
search through the tracks.
The SKIP- button can be used as follows:
Press once = This starts the current track again from
the beginning. (Only with Bluetoothh
operation)
Press twice = his jumps back to the previous track.
Press three times = This plays the song before etc. If the but-
ton is kept pressed down, the machine
starts to search through the tracks.
STOP/M+ (12)
The playback is stopped.
MODE/MEM/FOLDER (9)
• In stop mode for programming any order of tracks (see
the section on "Programmed Play").
During the playback of an audio CD:
Press once = the current track is repeated continu-
ously. The symbol "
display.
Press twice = the whole CD is played continuously.
The symbol "
Press three times = all functions are cancelled. The normal
play mode is resumed.
During playback of MP3 music:
Press once = the current track is repeated continuously. The
symbol " " will flash in the display.
Press twice = the selected folder is repeated continuously
( FOLDER appears in the display).
" will flash in the
" is lit in the display.