Maintenance; After Use Storage - Bosch AQUATAK 10 Operating Instructions Manual

F016 L70 370 - GB Seite 5 Donnerstag, 29. September 2005 2:57 14

Maintenance

Stop, remove plug from the power sup-
ply and disconnect from water supply.
Note: To ensure long and reliable service, carry out
the following maintenance regularly.
Regularly check for obvious defects such as loose
fixings, and worn or damaged components.
Check that covers and guards are undamaged and
correctly fitted. Carry out necessary maintenance or
repairs before using.
If the pressure washer should happen to fail despite
the care taken in manufacture and testing, repair
should be carried out by an authorised service agent
for Bosch garden products.
For all correspondence and spare parts orders, al-
ways include the 10-digit part number (TYP) from
the nameplate of the machine!
17 • F016 L70 370 • TMS • 06.09.05
Cleaning/inspecting the strainer
Expose the strainer 16 in the machine water inlet
A
connection by removing the inlet connector 10.
The strainer 16 can be easily removed with long
L
nose pliers. Rinse and replace. If damaged replace.
Never use the pressure washer without the strainer
or a damaged strainer.

After use storage

Clean the exterior of the machine thoroughly using a
soft brush or cloth. Do not use water, solvents or pol-
ishes. Remove all debris, especially from the venti-
lation slots.
Frost will damage a pressure washer that has not
been completely emptied of water. The machine
should be stored in a frost free room.
Do not place other objects on top of the machine.

Ensure cables are not trapped when storing.
Do not kink high pressure hose.
English - 5