Maintenance Schedule - Pagsta BOBBER User Manual

REMOVAL FROM STORAGE
1.Uncover and clean the motorcycle.
2.Check the batter voltage. When the voltage is 12.3V or below, you will need to charge before use.
3.Drain any rust-inhibiting oil from the fuel tank. Fill the fuel tank with fresh fuel.
4.Perform all pre-ride inspection checks. Test ride the motorcycle in a safe area away from traffic.
MAINTENANCE
Clean the motorcycle off dust and mud with dry cloth regularly. Dry the motorcycle when it is wet.
Apply a little rust-inhibiting oil on zinc-coated and chrome-coated parts. Wax the painted parts to keep
them looking new. Lubricate all moving Parts.
Inflate both tires to their recommended pressures.
Che ck all bolts, nuts and screws to prevent a safety hazard resulting from loosening.
Check both front and rear brakes. Immediately adjust and replace if they are excessively worn or don't
function properly.

MAINTENANCE SCHEDULE

Perform the pre-ride inspection at each scheduled maintenance period.
Symbols in the table stand for as follows:
1.INSPECT, CLEAN, ADJUST, LUBRICATE OR REPLACE IF NECESSARY.
C:CLEAN R:REPLACE A: ADJUST L:LUBRICATE I:INSPECT
* Should be serviced by your authorized PAGSTA dealer.
** I n the interest of safe ty, we recommend these items be serviced only by your authorized service dealer.
40