Parts Function - Pagsta BOBBER User Manual

[INSTRUMENTS AND INDICATORS]
1. Odometer is located in instrument cluster
2. Multi-function instrument cluster includes:
Speedometer, Odometer, Tripometer, L/R Turn
signal indicators, Hi beam indicator, Water
temperature alarm and indicator, EFI indicator
3. Ignition switch and cover
[Ignition Switch Function]
The ignition switch on the middle of the fuel tank or just below the right side of the fuel tank depending on model.
A. When the ignition switch is on the vertical position, the circuit is cut off; the engine can't be operated; Key can
be removed.
B. Open the cover, insert the key and turn it counterclockwise; the lock is off (the circuit is still cut off; after the
lock is moved on, the key can be removed,
C. At this time, move the ignition lock counterclockwise or clockwise to the internal gear position, the circuit is
closed, the neutral gear indicator is on, the odometer is on, the engine can start.(remark:move the lock
counterclockwise, the circuit is closed, but the front position light and the rear position light is off; move the lock
clockwise, the circuit is closed, but the front position light and the rear position light is on).
D. Move the ignition switch to the vertical position, the circuit is off and the engine is on the state of flameout,
insert the key to lock it.
Please note: Your specific model may
have some slight design differences.
1
¢2Ù
¢3á
10