Making Connections - Hisense 32K3110W Quick Setup Manual

ANT
Connect an outdoor VHF/UHF antenna or cable.
TV JACK
ANT
COMMON INTERFACE
Insert the CI+ module for watching scrambled services like pay-tv channels or
some HD channels.
TV JACK
NOTES
Before you insert/remove the CI+ module, ensure that the TV is switched off.
Then insert the CI card into the CI+ module in accordance with the Service
Provider's instructions.
Do not repeatedly insert or remove the Common Access Module as this may
damage the interface and cause a malfunction.
You must obtain a CI+ module and card from the service provider of the
channels you want to watch.
Insert the CI+ module with the SmartCard in the direction marked on the module
and SmartCard.
CI+ is not supported in some countries and regions; check with your authorized
dealer.
HDMI/COMP/AV
Connect a HDMI / Comp / AV cable from an external AV equipment. No sound
connection is needed for HDMI to HDMI connection. If the signal resolution does not
match the specification table, you need to change the setting of device according to
the table. Please consult your device user manual for instruction.
· To select the HDMI / Component / AV
Press [Input] button, when the list of input Source appears, press [<
source [HDMI] / [COMPONENT] / [AV], then press [OK] to connect.

Making Connections

or
(not included)
2
CAM CARD
5
Outdoor
Antenna
Antenna Cable (75Ω)
1
SMART CARD
Cable
ANT OUT
VHF/UHF Antenna
>] to select the
/