Related Manuals for Hisense 32A5100F
Summary of Contents for Hisense 32A5100F
- Page 1 QUICK SETUP GUIDE Before using the TV, please read this guide thoroughly and retain it for future reference. English ES-A20520J-1...
- Page 2 Important Safety Instructions ▐ Important Notice Paragraphs beginning with the symbol indicate important instructions, tips or conditions for the following settings. For your own safety and the optimal performance of your TV, ensure to read the safety instructions before performing any installation. It is not guarantee operation and performance of peripheral devices made by other manufacturers.
- Page 3 Important Safety Instructions The intended use and ambient conditions for this TV This TV is intended for the rendering of video and audio signals, on a table-top or wall- mounted, in a home or office environment. It must not be used in rooms with a high level of humidity or dust concentration.
- Page 4 Important Safety Instructions „ Moving/Transportation „ Power plug and power cable Before moving this TV, disconnect all - Do not touch the power plug with wet cables and move in the vertical position hands. only. Grasp the device on the upper and - Do not place heavy objects on the lower edges of the frame.
- Page 5 Important Safety Instructions „ Air ventilation and high Prevent small items from getting into the interior of the device through the ventilation temperatures slots. Such objects may cause short circuits, Install your TV only where there is proper which may cause fire. ventilation, and ensure that there is at least If something should get inside the unit, 10 cm free space on the sides and 20 cm...
- Page 6 Important Safety Instructions „ Thunder Storms If you have a cardiac pacemaker, keep a distance of at least 22 cm from the TV. Radio Pull out the power plug and all connected waves may interfere with the operation of a antenna cables from the TV during a pacemaker.
- Page 7 Important Safety Instructions „ Service/Repair „ Remote Control batteries Never remove the cover/back of the TV; - Incorrect installation may cause battery there are no user serviceable parts inside. leakage, corrosion and explosion. Refer all service to qualified service - Replace only with the same or personnel.
-
Page 8: Table Of Contents
SIMPLIFIED EU DECLARATION OF CONFORMITY Hereby, Hisense Visual Technology Co., Ltd. declares that the radio equipment type [ 32A5100F / 32A5120F / 32A5140F / 32A5160F / 32AE5000F / 32AE5010F / 32AE5030F / 32AE5050F / 40A5100F / 40A5120F / 40A5140F / 40A5160F / 40AE5000F / 40AE5010F / 40AE5030F / 40AE5050F ] is in compliance with Directive 2014/53/EU. -
Page 9: Installing The Stand Or Wall Mount Bracket
Installing the Stand or Wall mount bracket CAUTION Be sure to disconnect the A/C power cord before installing a stand or wall mount brackets. The display on your TV is fragile. Make sure the TV screen is not scratched or damaged by hard objects or from pressure. - Page 10 Installing the Stand or Wall mount bracket Installing the wall mount bracket Before mounting the TV, remove the TV stand if you have already attached it, and make sure the wall mount bracket supports the weight of your TV. CAUTION When mounting the TV on a wall, follow instructions provided with the wall mount bracket.
-
Page 11: Tv Front
TV Front TV Front Standby / Source Remote sensor / Power indicator Item Description Receive remote signals from the remote control. Remote sensor Do not put anything near the sensor, as its function may be affected. Power indicator The light is red in standby mode. Press the button to power on the TV. -
Page 12: Tv Rear
TV Rear TV Rear 32" Power cord NOTES ANT2 Jack supports power supply for satellite antenna (13/18V, 400mA max.) Check the jacks for position and type before making any connections. Loose connections can result in image or color problems. Make sure that all connections are tight and secure. - Page 13 TV Rear 40" Power cord NOTES ANT2 Jack supports power supply for satellite antenna (13/18V, 400mA max.) Check the jacks for position and type before making any connections. Loose connections can result in image or color problems. Make sure that all connections are tight and secure. Not all A/V devices have the ability to connect to a TV, please refer to the user’s manual of your A/V device for compatibility and connections procedure.
-
Page 14: Making Connections
Making Connections Outdoor Antenna Cable ANT OUT ANT 1 DVB-T/T2/C (not included) Antenna Cable (75Ω) VHF/UHF Antenna 13/18V 400mA ANT 2 (not included) Satellite antenna DVB-S/S2 Audio Amplifier/Speaker DIGITAL DIGITAL AUDIO OUT AUDIO OUT DIGITAL AUDIO cable (not included) Audio Amplifier/Speaker HDMI HDMI (ARC) - Page 15 Making Connections COMMON INTERFACE (CARD FACE FRONT) CAM CARD SMART CARD NOTES Before you insert/remove the CI+ module, ensure that the TV is switched off. Then insert the CI card into the CI+ module in accordance with the Service Provider’s instructions. COMMON Do not repeatedly insert or remove the Common Access INTERFACE...
-
Page 16: Remote Control
Remote Control Remote sensor window POWER: Switch the TV on or into standby mode Source: Select input sources TV/DTV: Enter the TV/DTV source TV/Radio: Enter the TV/Radio source Mute: Mute or restore the TV sound Zoom: Select the screen aspect ratio : Start recording NOTE: The information here will vary depending on the remote control model. - Page 17 Remote Control Number button: Direct channel selection or numbers input Still: Freezes video Recall: Return to the program that last viewed T.Shift: Time shift in DTV mode NOTE: The information here will vary depending on the remote control model. Text, Hold, Index, Size, Reveal, Subpage buttons can be used in DTV/ATV mode Media content control function buttons NOTE: The information here will vary depending...
- Page 18 Remote Control POWER: Switch the TV on or into standby mode SOURCE: Select input sources Number button: Direct channel selection or numbers input GUIDE: Display the Electronic Program Guide (DTV mode) CH.LIST: Display the Channel List on the screen Special function buttons : Display the quick setup menu/returns to the previous menu INFO: Display the current program...
- Page 19 Remote Control Installing Batteries in the Remote Control 1. Slide the back cover to open the battery compartment of the remote control. 2. Insert two AAA size batteries. Make sure to match the (+) and ( - ) ends of the batteries with the (+) and ( - ) ends indicated in the battery compartment.
-
Page 20: Turning The Tv On For The First Time
Turning the TV on for the First Time Turning the TV on for the First Time 1. Connect the mains cable to the mains socket after you have completed all the connections. 2. The first time you turn the TV on, it will go straight into the Installation Guide. 3. -
Page 21: Specifications
Specifications Features, appearance and specifications are subject to change without notice. 32" 40" Item 28.2 × 16.9 × 3.4 inches 35.2 × 20.2 × 3.4 inches Without Stand (717 × 428 × 86 mm) (893 × 513 × 86 mm) Dimension (W ×... -
Page 22: Other Information
Other Information Recycling/Licenses WEEE (Waste Electronic Electric Equipment) European Directive 2012/19/EU This symbol on the product or on its packaging indicates that this product must not be disposed of with your household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. - Page 23 Other Information EPREL Registration Information Model identifier Eprel registration number Model identifier Eprel registration number 32A5100F 359247 40A5100F 358779 32A5120F 359252 40A5120F 359658 32A5140F 359633 40A5140F 359662 32A5160F 359636 40A5160F 359663 32AE5000F 359640 40AE5000F 359665 32AE5010F 359642 40AE5010F 359667 32AE5030F...