Related Manuals for Hisense 32D50
Summary of Contents for Hisense 32D50
-
Page 1: Quick Setup Guide
32D50 40D50P QUICK SETUP GUIDE Before using the TV, please read this guide thoroughly and retain it for future reference. For more detailed instructions, please see the User Manual. English NO.1... -
Page 2: Table Of Contents
Contents Contents Accessories List......................1 Installing the Stand ......................2 TV Front..........................4 TV Rear ..........................5 Making Connections .......................5 Remote Control ......................9 Turning the TV on for the First Time ................11 Specifications .......................13 Accessories List The following accessories are included with TV: Base Stand User Manual MUTE... -
Page 3: Installing The Stand
Installing the Stand Installing the Stand NOTES The TV screen is very fragile,and must be protected at all times when removing the base stand.Be sure that no hard or sharp object,or anything that could scratch or damage the screen,come into contact with it.DO NOT exert pressure on the front of the TV at any time because the screen could crack. - Page 4 Installing the Stand WALL-MOUNT BRACKET If you need to use the Wall-mount Bracket, please refer to the below information. 200×100(32˝) 200×200(40˝) English...
-
Page 5: Tv Front
TV Front TV Front Remote Sensor Remote Indicator STANDBY / SOURCE Item Description Receive remote signals from the remote control. Remote sensor Do not put anything near the sensor, as its function may be affected. Red light up in standby mode. Blue light up in power on Remote Indicator mode. -
Page 6: Tv Rear
TV Rear & Making Connections TV Rear COMPONENT IN PC IN PC/DVI OPTICAL /AUDIO OUT ANT/CABLE IN HDMI 1 (ARC) AUDIO IN NOTES The Picture is Only for Reference. HEADPHONE Connect Headphone for audio out of the TV. The built-in speakers will be disabled once the headphone is connected. TV JACK /AUDIO OUT (not included) -
Page 7: Making Connections
Making Connections HDMI/COMP/AV Connect a HDMI / Comp / AV cable from an external A/V equipment. No sound connection is needed for HDMI to HDMI connection. If the signal resolution does not match the specification table, you need to change the setting of device according to the table. - Page 8 Making Connections OPTICAL Connect an optical cable from an external digital audio system Optical S/PDIF—is a type of digital audio interconnect cable used in consumer audio equipment to output audio over reasonably short distances. The signal is transmitted over a fibre optical cable. Before connecting a digital audio system to the OPTICAL jack, you should decrease the volume of both the TV and the system to avoid that the volume suddenly become bigger.
- Page 9 Making Connections NOTES When connecting a hard disk or a USB hub, always connect the mains adapter of the connected device to the power supply. Exceeding a total current consumption may result in damage. The maximum current consumption is 500mA. For individual non-standard high-capacity mobile hard disk, if it's impulse current is greater than or equal 500mA, it may cause TV-rebooting or self-locking.
-
Page 10: Remote Control
Remote Control Remote sensing Window Power button Available source selection Switch to DTV Radio program Zoom image Analog / Digital TV Mute the sound Start video recorder Set the sleep time Select USB-Digital Media player mode Select Audio language Mono/Stereo Display the subtitle content operation,Audio select of the signal... - Page 11 Remote Control Installing Batteries in the Remote Control 1. Slide the back cover to open the battery compartment of the remote control. 2. Insert two AAA size batteries. Make sure to match the (+) and ( - ) ends of the batteries with the (+) and ( - ) ends indicated in the battery compartment.
-
Page 12: Turning The Tv On For The First Time
Turning the TV on for the First Time Turning the TV on for the First Time 1. Connect the mains cable to the mains socket after you have completed all the connections. 2. Switch on at the bottom of the TV. 3. - Page 13 Turning the TV on for the First Time Select Start into Auto Scan. After scan, the channels are arranged in a preset order. If you wish to skip channels, modify the preset order or rename channels, select Edit Programmes under the Channel menu. NOTE If you want to reboot the Installation Guide, you can press the [Menu], and select Setup menu, then press [OK] to select First Time Setup.
-
Page 14: Specifications
RGB / 60 Hz (640×480, 800×600, 1024×768) HDMI Input YUV / 60 Hz (480 I, 480 P, 720 P, 1080 I, 1080 P) YUV / 50 Hz (576 I, 576 P, 720 P, 1080 I, 1080 P) Dial: 1800 447 367 (Toll Free) http://www.hisense.com.au English...