If Your Extractor Hood Has Decorative Ducts - John Lewis JLBIHD625 User Manual

If Your Extractor Hood Has Decorative
Ducts
12 Remove the cupola and loosen the screws holding the
fastening pins.
13 Connect the fl ange on the fl exible hose to the air exhaust
hole on top of the cooker hood.
14 Adjust the width of the support bracket of the top
connector.
Cooker hood user guide
15 Fasten the support bracket to the ceiling on the same axis
as the cooker hood.
16 Slide the top connector inside the lower duct and place
this on the cooker hood body.
Your cooker hood is now ready for use.
13