Bosch GDR 9,6 V Original Operating Instructions page 12

OBJ_BUCH-608-001.book Page 12 Thursday, December 6, 2007 4:35 PM
12 | English
Maintenance and Service
Maintenance and Cleaning
Before any work on the power tool (e. g.,
maintenance, tool change, etc.) as well as
during transport and storage, set the rota-
tional direction switch to the center posi-
tion. Unintentional actuation of the On/Off
switch can lead to injuries.
For safe and proper working, always keep
the power tool and the ventilation slots
clean.
Replacing the Carbon Brushes (see figure E)
Check the length of the carbon brushes approx.
every 2 – 3 months and replace the carbon brush-
es if required.
Never replace only a single carbon brush!
Criteria for replacement of the carbon brushes: A
dotted or broken line is visible on one of the large
side surfaces of each carbon brush. When either
of both carbon brushes is used up to this line,
then both carbon brushes should be replaced im-
mediately in order to protect the armature
against possible damage.
Note: Use only carbon brushes supplied by
Bosch and intended specifically for your product.
– Unscrew the caps 13 using a suitable screw-
driver.
– Replace the spring-loaded carbon brushes 12
and screw the caps back on again.
If the power tool should fail despite the care tak-
en in manufacturing and testing procedures, re-
pair should be carried out by an after-sales ser-
vice center for Bosch power tools.
In all correspondence and spare parts orders,
please always include the 10-digit article number
given on the type plate of the power tool.
1 609 929 M69 | (6.12.07)
After-sales service and customer
assistance
Our after-sales service responds to your ques-
tions concerning maintenance and repair of your
product as well as spare parts. Exploded views
and information on spare parts can also be found
under:
www.bosch-pt.com
Our customer consultants answer your questions
concerning best buy, application and adjustment
of products and accessories.
In case of a claim, repair or purchase of replace-
ment parts or in case of queries or other prob-
lems, please contact your local dealer or Bosch
representative.
People's Republic of China
Website: www.bosch-pt.com.cn
China Mainland
Bosch Power Tools (China) Co., Ltd.
567, Bin Kang Road
Bin Jiang District 310052
Hangzhou, P.R.China
Service Hotline: 800 8 20 84 84
Tel.: +86 (571) 87 77 43 38
Fax: +86 (571) 87 77 45 02
HK and Macau Special Administrative Regions
Melchers (H.K.) Ltd, Room 1210
Shun Tak Centre, West-Tower
168 – 200 Connaught Road, Central Hong Kong
Customer Service Hotline: +852 (25) 89 15 61
Fax: +852 (25) 48 79 14
E-Mail: bosch@melchers.com.hk
Indonesia
PT. Multi Tehaka
Kawasan Industri Pulogadung
Jalan Rawa Gelam III No. 2
Jakarta 13930
Indonesia
Tel.: +62 (21) 4 60 12 28
Fax: +62 (21) 46 82 68 23
E-Mail: sales@multitehaka.co.id
www.multitehaka.co.id
Bosch Power Tools