Checking Voicemail; Using Call Waiting - AT&T VoiceMail Manager 100 User Manual

C V M
HECKING OICE AIL
Checking VoiceMail is easier than ever with the VoiceMail Manager 100. Simply press
the DIAL VM button and the VoiceMail Manager 100 will dial your Voice Mailbox and
display PICK UP PHONE AND DIAL PASSWORD.
VoiceMail Manager 100 to dial automatically your password, the display will show PICK
UP PHONE.
To listen to your messages, pick up your phone when the VoiceMail Manager 100
scrolls the PICK UP PHONE message. Use your telephone keypad to play, save, and
delete messages, as well as perform other VoiceMail functions.
U C W
SING ALL AITING
When you are on the telephone and a new call comes in, the Caller ID information
about the new call will appear in the display and the NEW CALL light will illuminate.
(Refer to Viewing Calls). If you don't already have a phone or caller ID device with this
capability then you must go to SETUP (page 14) and TURN ON CALL WAITING
CALLER ID.
If you wish to answer the new call, press the FLASH button on the VoiceMail Manager
100 to put your first caller on hold while you answer the Call Waiting call. Press the
FLASH button to return to the original caller.
If you decide not to answer the Call Waiting call, the call information will be stored in the
VoiceMail Manager 100's Call Log. Review the Call Log as described in Viewing Calls.
If you have configured your
17