Pulse Player Settings - Outform idisplay User Manual

Pulse Player Settings

The following table describes the Pulse Player settings. For more information on how to
use the underlying Android operating system, refer to the following section.
Setting
Software Update
Back
Exit
Exit Event
Z Gesture
Detection Accuracy
Check for available Pulse Player software updates. This
requires an Internet connection.
Return to playing the configured content.
Exit Pulse Player and open the home screen of the base
Android operating system.
Configure how the user stops content playback to open the
Pulse Player settings interface. Settings include the following:
• Z gesture: Draw a large Z shape on the screen by sliding
a finger across the screen, starting at the top left of the
screen.
• Tapping the screen 5 times: Tap anywhere on the screen
5 times.
• Z gesture and tapping the screen 5 times: Either draw a Z
shape or tap 5 times as described above.
Choose "Easy", "Medium, or "Hard" to configure how
accurately the user must draw the Z shape to perform the
Exit Event. "Easy" indicates a low level of drawing accuracy,
"Medium" a fair amount of accuracy, and "Hard" a stricter
level of accuracy, all with regards to how straight the lines of
the Z shape are drawn and whether the drawing is oriented
correctly.
11
Description
All Rights Reserved
C