Description of parking cooler The operating instructions contain important information The Cool Top Vario 10 E parking cooler cools the passenger for the operation and maintenance of the Cool Top Vario 10 compartment of the lorry driver's cab according to the E Parking Cooler.
Cool Top Vario 10 E 1 General information Delivery scope Fig. 1 Item Designation Quantity Parking cooler Operating instructions Power supply cable, 5 m Type AAA battery Remote control A vehicle-specific installation kit is required for the installation of the parking cooler in the lorry. This consists of the interior trim, the fastening materials and the installation instructions.
Make sure that the parking cooler is switched off before the driver's cab (e.g. maintenance work on the vehicle) is tilted. If the Cool Top Vario 10 E parking cooler is tilted by more than 30° out of the normal position, (for example, during...
In case of improper use of the parking cooler, there is a danger of injuries or damage. The Cool Top Vario 10 E parking cooler is intended for cooling lorry driver's cabs while parked. As a result, the environmentally harmful running of the engine to operate the vehicle air-conditioning system can be avoided.
3 Operation Cool Top Vario 10 E Operation Control panel Fig. 2 Item Designation Infrared receiver for remote control Display Fan + button Fan - button Automatic mode for optimum operation (time and energy) ECO setting: compressor speed up to 3,000 rpm...
Cool Top Vario 10 E 3 Operation Remote control Fig. 3 Item Designation Infrared transmitter Indicator LED Fan + button Temperature + button Fan - button Temperature - button ECO setting: compressor speed up to 3,000 rpm Without ECO setting:...
3 Operation Cool Top Vario 10 E Operate parking cooler 3.3.4 Set air distribution (air outlet) The air distribution can be adjusted with the two air outlets 3.3.1 Switch on parking cooler in three types of distribution. In addition, the emitted air can be closed at each air outlet.
Cool Top Vario 10 E 3 Operation AUTO Advanced settings Pressing the AUTO button optimally controls the set The advanced settings enable adjustment to special temperature both via the compressor speed and via the fan environmental conditions (F1, F2, F3, F4, F5) and service speed.
3. Set the desired value by pressing the Timer switching on the parking cooler. button on the control panel. • Operate the Cool Top Vario 10 E approx. 5 minutes together with the vehicle air- conditioning system before using it while parked 3.4.3 Setting of the minimum display to dissipate stored heat.
The parking cooler may only be serviced and opened by a trained, authorised Webasto Service Centre. CAUTION For all display messages listed here (see table), the faults may only be eliminated by a Webasto Service Centre. NOTE For all display messages listed here (see table), the parking cooler switches off.
To dispose of the old system, contact a specialist company in an extension of the warranty period. for the disposal of hazardous waste or Webasto. The legal regulations and the general Webasto terms of sale and delivery apply (can be viewed and downloaded at www.webasto.com).
Cool Top Vario 10 E 6 Technical Data Technical Data Cool Top Vario 10 E Parking Cooler Refrigerant R134a (pre-filled) Power supply (voltage range adjustable) 24,0 V (20.1 to 26.5 V/DC) Maximum power consumption 13 A (ECO mode), 20 ± 2 A...
Page 16
Bij een meertalige versie is de Duitse versie bindend. W przypadku wersji kilkujęzycznej wiążący jest tekst w języku niemieckim. V prípade nesúladu jazykových verzií je záväzná nemecká. Webasto AG Postfach 80 D - 82132 Stockdorf Germany National: Hotline: 01805 951 159 (€...
Need help?
Do you have a question about the Cool Top Vario 10 E and is the answer not in the manual?
Questions and answers