Delay Start - Miele TMB640 SERIES Operating Instructions Manual

Delay start

To select delay start
With delay start you can delay the start
of the programme by up to a maximum
of 24 hours.
However: delay start cannot be used
with the Warm air programme.
 After selecting the programme touch
the  sensor.
–  will flash
– Times of up to  are selected in
 minute stages and then in hour
stages up to .
– If you touch the sensor continuously,
the time will count up to .
– Touching the  sensor again when
 shows in the display will delete
the time selected.
To begin delay start
 Press the Start/Stop button.
–  will light up
– Delay start times of more than  will
count down in hours and then in
minutes until the start of the
programme.
28
– The drum will turn briefly every hour
until the start of the programme to
reduce creasing.
To change delay start after it
has started counting down
 Press the Start/Stop button.
–  will flash
 Touch the  sensor to change the
time.
 Press the Start/Stop button.
To add/remove laundry after
delay start has started
counting down
 You can open the door to add/
remove laundry.
– All programme settings will be saved
–  will flash
You can also change the drying level, if
required.
 Press the Start/Stop button so that
the delay start time continues to
count down.
To cancel delay start
 Switch the dryer off and then on
again.