Correct Use - Miele TMB640 SERIES Operating Instructions Manual

Heat pump dryer
Hide thumbs Also See for TMB640 SERIES:
Table of Contents

Advertisement

Warning and Safety instructions
Please observe the instructions in "Installation and connection"
and the "Technical data".
The accessibility of the plug must always be ensured, in order to
disconnect the tumble dryer from the mains.
Do not block the gap between the bottom of the tumble dryer and
the floor with plinth facings, deep pile carpet etc. This would hinder
a sufficient flow of air to the dryer.
Make sure the dryer door can be opened without hindrance after
installation.

Correct use

The maximum load for this tumble dryer is 8.0 kg (dry weight).
The maximum recommended loads for individual programmes are
given in the Programme chart.
To prevent the risk of fire, do not connect the tumble dryer via a
controllable socket (e.g. a timer or a peak-load switch-off device).
If the drying programme is interrupted before the end of the cooling
down phase, this could cause the laundry to self-ignite.
10

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tmb 640 wp

Table of Contents