Tank Pressure Alarm; Tones - Suunto VYPER NOVO User Manual

Display
batt

3.26.4 Tank pressure alarm

There are two tank pressure alarms. The first is fixed at 50 bar (700
psi) and cannot be changed.
The second is user configurable. It can be turned on or off and can
be used for a pressure range of 10–200 bar (200-3000 psi).
To set the tank pressure alarm value:
1. While in a dive mode, keep [DOWN] pressed to enter settings.
2. Press [DOWN] to scroll to Tank Press Alarm and press [SELECT].
3. Press [UP] to turn the alarm on and confirm with [SELECT].
4. Adjust the pressure level with [UP] or [DOWN] and confirm with
[SELECT].
5. Press [MODE] to exit.

3.27 Tones

Device tones can be turned on or off. When tones are off, there are
no audible alarms.
66
Indication
1. Transmitter being out of range (>1.2 m
(4 ft))
2. Transmitter is in power saving mode
3. Transmitter is on another channel. To
correct this:
Pressure transmitter battery voltage is low.
Change the transmitter battery!