Software Version; Stopwatch - Suunto VYPER NOVO User Manual

3.22 Software version

You can check the software version and battery status of Suunto
Vyper Novo under the general settings.
1. While in time mode, keep [DOWN] pressed.
2. Press [UP] to scroll to Version and press [SELECT].
3. The software version is displayed along with the battery voltage.

3.23 Stopwatch

The stopwatch can be used to measure elapsed and split times.
To activate the stopwatch:
1. While in time mode, scroll through the bottom row view by
pressing [UP] or [DOWN] until the stopwatch is displayed.
2. Press [SELECT] to start/stop the stopwatch.
3. Press [DOWN] to take split times.
4. Keep [SELECT] pressed to reset the stopwatch.
After stopping the stopwatch, you can scroll through the split times
with [DOWN].
54