Table of Contents
Advertisement
Suunto EON Steel
WARNING: WHEN THE OXYGEN LIMIT FRACTION INDICATES THAT THE MAXIMUM
LIMIT IS REACHED, YOU MUST IMMEDIATELY TAKE ACTION TO REDUCE OXYGEN
EXPOSURE. Failure to take action to reduce oxygen exposure after a CNS%/OTU warning is
given can rapidly increase the risk of oxygen toxicity, injury, or death.
3.32. Tank pressure
Your Suunto EON Steel can be used with multiple Suunto Tank PODs for wireless tank
pressure transmission.
To install and pair a Suunto Tank POD:
1. Install the Tank POD and open the valve.
2. Wait for green LED on Tank POD to flash.
3. If your Suunto EON Steel has a blank screen, press any key to activate it.
4. Hold your Suunto EON Steel close to the Tank POD as shown.
5. After a few seconds, a menu pops up on the screen showing the Tank POD serial number,
battery status and the tank pressure. From the menu, select the correct gas for that Tank
POD.
128999459
POD
Air
OK
180
bar
WARNING: The battery level indication shown when pairing the Tank POD is an
approximation only. The POD battery may deplete faster than the indication suggests.
NOTE: We recommend changing the Tank POD battery after completing 200 dives or 2
years.
34
Advertisement
Table of Contents
