Water Contact - Suunto VYPER NOVO User Manual

To set tones:
1. While in time mode, keep [DOWN] pressed.
2. Press [DOWN] or [UP] to scroll to Tones and press [SELECT].
3. Press [DOWN] or [UP] to toggle on/off and confirm with
[SELECT].
4. Press [MODE] to exit.

3.28 Water contact

The water contact is located on the side of the case. When
submerged, the water contact poles are connected by the
conductivity of the water. Suunto Vyper Novo switches to dive state
when water is detected and the depth gauge senses water pressure
at 1.2 m (4 ft).
AC
The AC is shown until the water contact deactivates. It is important
to keep the water contact area clean. Contamination or dirt can
4.1 Handling
prevent automatic activation/deactivation. See
guidelines .
67