Aiwa XR-MS5 Service Manual page 9

3) Removing the CD MECHA ASSY
(1) Remove the SPR-E, MECHA.
(2) Remove the hooks (at two positions) of the HOLDER MECHA and push down the CD mechanism and
remove the CD mechanism.
* When reassembling it, align the positions of the rubber dampers and the damper hooks as shown.
1) SPR-E, MECHA
4) Removing the PLT, SLIDER
(1) Remove the SPR-E, SLIDER.
(2) Remove the two screws A and remove the PLT, SLIDER.
A
Reassembling the PLT, SLIDE
(1) Insert it inside the two base hooks.
(2) Align the position of the three shafts.
(3) Align the position of the gear and the screw boss at two positions.
(4) Fix them with two screws A.
CD MECHA
PLT, SLIDER
A
1) SPR-E, SLIDER
2) HOOK
Be careful to align them
when reassembling it.
SMALL
LARGE
BOSS
3)
– 9 –
Damper hook
LARGE
SMALL
BOSS
1)
2)