Aiwa XR-MS5 Service Manual page 11

6) Removing the LVR, ROLLER ASSY
(1) Insert the LVR, ROLLER ASSY L and R into the HLDR ASSY CLAMP.
(2) Insert the SHAFT A into the BASE HOLE A’.
(3) Insert the GEAR,SHAFT B into BASE HOLE B’.
(4) Insert the SPRINGs C1 and C2 into the BASE SLITs C1' and C2'.
(5) While pushing down the LVR, ROLLER ASSY, insert the SHAFT D into the BASE HOLE D’.
(6) The LVR, ROLLER is fixed at the specified position as shown.
1) SPR-T, ROLLER L, R
2) SHAFT A
HLDR ASSY
CLAMP
3) GEAR, SHAFT B
5) SHAFT D
4) SPRING C1
2) BASE HOLE A'
3) BASE HOLE B'
4) SPRING C2
5) BASE HOLE D'
4) BASE SLIT C1'
4) BASE SLIT C2'
6)
– 11 –