Philips S9712/33 User Manual page 54

ENGLISH
3
1
2
2 Hold the shaver upside down above the holder.
Make sure the front of the shaver points
towards the SmartClean system.
3 Place the shaver in the holder (1), tilt the
shaver backwards (2) and press down the top
cap to connect the shaver ('click') (3).
, The battery symbol starts to flash, which
indicates that the shaver is charging.
4 Press the on/off button on the SmartClean
system to start the cleaning program.
, The rinsing symbol either lights up continuously
(SmartClean Pro) or starts flashing (SmartClean
Plus).
Note: The rinsing phase takes approx. 10 minutes.
Note for S9712/33, S9711/33: The progress bar shows
the progress of the rinsing phase.
, During the drying phase, the drying symbol
either lights up continuously (SmartClean Pro)
or starts flashing (SmartClean Plus).
Note: The drying phase takes approx. 4 hours.
Note for S9712/33, S9711/33: The progress bar shows
the progress of the drying phase.
, When the cleaning program has been completed,
the ready symbol lights up continuously.
, The battery symbol lights up continuously to
indicate that the shaver is fully charged.
Note: Charging takes approx. 1 hour.
53