Playing Tracks In Random Order (Shuffle Play); Playing Tracks In The Desired Order (Programme Play) - Sony LBT-G200K Operating Instructions Manual

Locating a Specific Track
You can quickly locate any track while
playing or pausing a CD.
To locate Press
)± (or + on the
the next or
succeeding remote) repeatedly until
tracks you find the track
≠0 (or = on the
the current or
preceding remote) repeatedly until
tracks you find the track
Locating a Particular Point
in a Track
You can locate a particular point in a track
while playing or pausing a CD. Use the
buttons on the unit to operate this feature.
To locate a Press
point
)± (forward) or
While
≠0 (backward) and
monitoring the
sound hold down until you find
EN
the point.
)± (forward) or
8
Quickly by
≠0 (backward) and
observing the
display during hold down until you find
pause the point. You will not
hear the sound during
this operation.
Playing Tracks in
Random Order
(shuffle play)
You can play all the tracks on a CD in
random order.
SYSTEM
POWER – ON
PLAY MODE
Chapter 2: the CD Player
CONTINUE
1
Press FUNCTION on the remote
repeatedly until "CD" appears in the
display.
2
Press SHUFFLE on the remote or press
PLAY MODE on the unit repeatedly
until "DISC SHUFFLE" appears in the
display.
3
Press CD · (or ( on the remote).
" J " appears and then all the tracks
play in random order.
To skip to the next track, press )±.
To replay the current track, press
0≠. You cannot replay the
previous track.
To stop playing
Press p.
To cancel shuffle play
Press CONTINUE on the remote or press
PLAY MODE twice.
Playing Tracks in the
Desired Order
(programme play)
You can programme up to 32 tracks in the
order you want them to be played.
Use the buttons on the remote to do this
operation.
p
3
CONTINUE
≠0/)±
1
2
SYSTEM
POWER – ON
1
P
p
2,4
5
3
CHECK
CLEAR
1
Press FUNCTION repeatedly until
"CD" appears in the display.
2
Press PROGRAM.
"PROGRAM" appears in the display.
3
Press = or + to choose a track.
The disc number, track number and the
total playing time appear.
4
Press PROGRAM.
The chosen track is programmed and its
number lights up in the music calendar.
If the track number disappears before
you press PROGRAM, go back to step 3.
To programme additional tracks, repeat
steps 3 and 4.
Note
• If "- - . - - " appears instead of the total
playing time, this means
– you have programmed a track
number which exceeds 20.
– the total time has exceeded 100
minutes.
5
Press (.
All the tracks play in the order you
chose.
To Press
Check the CHECK repeatedly*
programme
2
Programme a pause P*
p
Stop play
Cancel the
CONTINUE*
programme play
Erase a track from
CLEAR in stop mode
the end
Erase a specific CHECK repeatedly
track so the number of the
track lights up, and
press CLEAR
p once in stop mode
Erase the entire
programme
1
* After the last track appears, "CHECK
End" appears in the display.
2 "P" appears in the display and the total
*
playing time is reset to 0.00.
3 The programme is erased.
*
1
3