Display - Panasonic KX-TD7680 Operating Instructions Manual

Display

<Radio Signal Strength>
Strong
Weak
Out of range
<Off-hook Status>
<Off-hook Status for Intercom calls>
<Programming Mode>
<Incoming Call Log notification>
<Message Waiting>
When you receive a message while in
standby mode, the PS will alert you by
vibrating or ringing, depending on the
current setting of the Ringer Volume.
<Navigator>
When using the navigator key, only the
displayed arrows can be pressed.
<Battery Strength>
Full
Low
Needs to be charged
Before Operating the PS
<F-CO Key Display>
The display depends on the operation. (See
page 12.)
<Others>
Ringer ON & Vibration OFF
Ringer ON & Vibration ON
Ringer OFF & Vibration ON
Ringer OFF & Vibration OFF
Meeting mode
Call Forwarding
Do not disturb
Auto Answer mode
<Soft Key Display>
The icons displayed above each soft button
indicate what functions the soft buttons
perform. Functions displayed depend on the
state of use. Press the corresponding soft
button to select a function.
: Used to store a new item in the PS
dialing directory.
: Displayed when in
entry mode, shown in table 1 on page
27. Press to switch to
: Displayed when in
entry mode, shown in table 2 on page
28. Press to switch to
: Used to enter "X". The "X" can be
entered numbers you want when
dialing.
character
mode.
character
mode.
9