Panasonic KX-TD7680 Operating Instructions Manual page 42

Troubleshooting
Problem
"NO SERVICE" is
displayed.
The alarm sounds after
pressing the Redial
button.
The PS stops working
during operation.
The display does not
show a strong radio
signal " " even
though you are near the
CS.
The alarm sounds
during a conversation
while receiving a weak
radio signal "
42
• The PS is out of range.
→ Move closer to the CS.
• The Call Log contains no entries.
→ Turn the power OFF and ON. Then try again. (See "Power On/Off" on
page 6.)
→ Re-insert the battery and try again. (See "Setting Up" on page 4.)
• Normally, the PS user can make a call even with "
this case, the current linked CS is still connected even though
another CS is closer.
• The radio signal is weak.
→ Move closer to the CS.
".
Description and Solution
" status. In