Attach The Canopy; Extend And Secure The Tow Bar - InStep Single Seat Bicycle Trailer User Manual

Attach the Canopy

1. Slide the canopy over the canopy frame.
2. Snap the canopy in place, there are 2 snaps
on each side, then secure with the hook and
loop fasteners.
Snap
Hook and loop fastener
(rear edge not shown)

Extend and Secure the Tow Bar

1. Place the trailer on its side with the tow bar
on top.
2. Remove the
locking pin from
the bracket.
Snap
3. Unfold the tow
bar until it rests
on the front part
of the bracket.
Tow bar
4. Insert the locking
pin through both the
bracket and tow bar.
Slide the metal
5.
Locking
safety loop onto the
pin
locking pin. Check
that it is securely
Safety
in place.
loop
Locking
pin
7