Page 2
English ..................................5 Čeština ..................................21 Slovenčina ................................37 Magyarul ................................53 Polski ..................................69 Русский .................................. 85 FDS 1012-A...
Contents Screwdriver INSTRUCTION MANUAL Thank you for your purchase of the Screwdriver. For your personal safety, read and understand the Instruction Manual before using. Keep the Instruction Manual in a safe place for future reference. CONTENTS PICTORIAL APPENDIX ............................2 1.
General safety instructions 1. GENERAL SAFETY INSTRUCTIONS WARNING! Carefully read the instruction manual before use. Important safety warnings Unpack the product carefully and be sure not to throw away any part of the package before having found all components of the product. Keep the product in a dry place out of reach of children.
General safety instructions Carefully read, remember and keep these safety instructions WARNING! In the use of electric machines and power tools, it is necessary to respect and follow the following safety instructions for the reasons of protection against electric shock, personal injury and danger of fire. The term “power tool” in the instructions below refers both to mains-operated (corded) power tool or battery-operated (cordless) power tool.
General safety instructions If an extension cord is used, always check whether its technical parameters match the information specified in the type label of the power tool. When operating a power tool outdoors, use an extension cord suitable for outdoor use. If extension drums are used, these must be rolled out to prevent overheating of the cord.
Page 8
General safety instructions Power Tool Use and Maintenance Always disconnect the power tool from the mains in case of any problem during the work, before cleaning the power tool or its maintenance, during each transportation and after the completion of the work! Never operate a power tool if it is damaged in any way. Immediately stop working if the power tool generates abnormal noise or smell.
Page 9
General safety instructions Handle the batteries with care. Rough handling could result in leak of chemical substance from the battery. Avoid contact with such substance and if, nonetheless, any contact occurs wash the affected area under running water. If eyes get into contact with the chemical substance seek immediately medical aid.
Symbols SYMBOLS The product complies with the applicable standards and regulations. Read the Instruction Manual attentively prior to use. Double-insulated. Use eyes protective equipment Use ears protectiove equipment Subjected to recycling SCREWDRIVER OPERATING INSTRUCTIONS...
Technical specifications 8. TECHNICAL SPECIFICATIONS SCREWDRIVER: Battery 3.6V Li-ion/1300mAh Speed 180rpm Level of acoustic pressure Lpa 72dB(A) Charger: Battery charger data 220-240V/50Hz Charging time 3-5 hour Electric shock protection class Class II Protection against moisture IP20 Output valtage 6V d.c.,300mA Amendments to text and technical parameters are reserved.
Disposal 9. DISPOSAL INSTRUCTIONS AND INFORMATION ON DISPOSAL OF USED PACKAGING Put any used package material to the place determined by the municipality for waste disposal. DISPOSAL OF USED ELECTRIC AND ELECTRONIC EQUIPMEN This symbol on products or accompanying documents means that used electric or electronic products must not be put to ordinary municipal waste.
Declaration of conformity 10. DECLARATION OF CONFORMITY Product/Name: SCREWDRIVER / FIELDMANN Type / Model: FDS 1012 -A ........................3.6V Li-ion/1300mAh The product complies with the following directives: The Directive of the European Parliament and the Council No. 2006/95/EC dated 12 December 2006 on the harmonisation of the laws of Member States relating to electrical equipment designed for use within certain voltage limits.
Need help?
Do you have a question about the FDS 1012 - A and is the answer not in the manual?
Questions and answers