Advertisement
K K e e e e p p W W a a r r m m / / R R e e h h e e a a t t
How to operate the warm temperature to my mode
▶ Use it while opening the lid when there is too much water or rice becomes too soft.
� Press Keep Warm/Reheat button in my
mode (Refer to page 17). The display of
mark will change with a buzzer. '
mark is first mark.
1. When opening the lid, if too much water is spilt :
2. If the edge of rice is too soft :
How to keep warm during sleep
▶ When keeping the rice warm for a long time, set up the temperature low to prevent the following quality of
rice: smell, dry, change of color ; from PM10:00 ~ AM 04:00.
How to set up
1. In the My Mode function, press the Keep Warm/Reheat button. 'The custom-made warming
mode' will be entered. At the same time, press the preset button. The display will indicate as
below.
2. When entering the custom-made warming mode in bed, press the Hrs/SOAK button.
'
' display will be corrected and press the My Mode function to set up.
3. After entering the custom-made warming mode, if you do not press the any other buttons
within 7 seconds, the function will return to the previous cancelled function.
4. This function must be activated by the buyer depending on necessity.
How to release
1. In the My Mode function, press the Keep Warm/Reheat button. 'The custom-made
warming mode'will be entered. At the same time, press the preset button. The display
will be shown as below.
2. When entering the custom-made warming mode in bed, press the Min/HEAT button.
'
'display will blink and then press the custom-made rice taste function to release.
3. After entering the custom-made warming mode in bed, press the cancel button or do not
press any button for 7 seconds, then function will go back to the prior cancelled function.
▶ If you need to keep the rice warm during sleep, do not use this function. This function makes
the rice cooler than normal. In summer, the rice can be spoiled and may smell because of
high temperature. If possible, do not use the custom-made warming mode while sleeping.
'
Press Hrs/SOAK button to raise the setting mode about 1~2 step.
Press button Min/Heat to reduce the setting mode about 1~2 step.
�-1 Press Hrs/SOAK button to change the
display as
� Select the menu you want, then the press
the My Mode button and set-up time will
be automatically entered with a buzzer.
(If you press the cancel button or do not
press a button within 7 seconds, the
function will be cancelled and return to
standby mode.)
�-2 Press Min/HEAT button to change the
display as
23
Advertisement
