Table of Contents
Advertisement
5. When you complete the configuration, press the F10 key to save and exit. You also can select the
Restart tab on the ThinkPad Setup menu, and restart your computer with one of the provided options.
Note: You can press the F9 key to restore to the default settings.
Main menu
When you enter the ThinkPad Setup program, you will first see the Main menu as follows:
• UEFI BIOS Version
• UEFI BIOS Date (Year-Month-Date)
• Embedded Controller Version
• ME Firmware Version
• Machine Type Model
• System-unit serial number
• System board serial number
• Asset Tag
• CPU Type
• CPU Speed
• Installed Memory
• UUID
• MAC Address (Internal LAN)
• Preinstalled OS License
• UEFI Secure Boot
• OA3 ID
• OA2
Config menu
To change the configuration of your computer, select the Config tab from the ThinkPad Setup menu.
The following table lists the Config menu items. Default values are in boldface. The menu items might
change without notice. Depending on the model, the default value might vary.
Attention: The default configurations are already optimized for you. Improper change of the configurations
might cause unexpected results.
Table 2. Config menu items
Menu item
Network
66
ThinkPad X260 User Guide
Submenu item
Value
Wake On LAN
• Disabled
• AC only
• AC and Battery
Comments
Enable the computer to power on when
the Ethernet controller receives a magic
packet (a special network message).
If you select AC Only, Wake on LAN is
enabled only when the ac power adapter
is attached.
If you select AC and Battery, Wake on
LAN is enabled with any power sources.
Notes:
Advertisement
Table of Contents
