Lenovo ThinkPad X260 User Manual page 86

Table 2. Config menu items (continued)
Menu item
Beep and Alarm
Intel AMT
70
ThinkPad X260 User Guide
Submenu item Value
Disable Built-in Battery • Yes
• No
Password Beep • Disabled
• Enabled
Keyboard Beep • Enabled
• Disabled
Intel AMT Control • Disabled
• Enabled
• Permanently
CIRA Timeout 0-255
Note: The default
value is 60
seconds.
Console Type • PC ANSI
• VT100+
Comments
is attached. When the system is in
hibernate state, the system resumes.
If you select Disabled, the system is not
powered on nor resumed when the ac
power adapter is attached.
Temporarily disable the internal built-in
battery for servicing the system. After
selecting this item, the system will be
automatically powered off. The system
is then ready to be serviced.
Note: The battery will be automatically
re-enabled when the ac power adapter
is reconnected to the system.
Enable this option to have a beep
sound when the system is waiting for
a power-on, hard disk, or supervisor
password. Different beeps will sound
when the entered password matches
or does not match the configured
password.
Enable or disable keyboard beep when
unmanageable key combinations are
pressed.
If you select Enabled, Intel AMT (Active
Management Technology) is configured
and additional setup items are provided
in MEBx (Management Engine BIOS
Disabled
Extension) Setup.
If you select Permanently Disabled,
you will never be able to enable it again.
Be cautious when you want to use this
option.
Note: You can enter the MEBx Setup
menu by pressing the Ctrl+P key
combination in the Startup Interrupt
Menu window. To display the Startup
Interrupt Menu window, press the black
button or Enter key during the power-on
self-test (POST).
Set the timeout option for CIRA
connection to be established. Selectable
second values are from 1 to 254.
If you select 0, use 60 seconds as the
default timeout value.
If you select 255, the waiting time for
establishing a connection is unlimited.
Select the console type for AMT.