Table of Contents
Advertisement
Using a flash media card or a smart card
Your computer has a media-card-reader slot. It supports the following cards:
• MultiMediaCard (MMC)
• Secure Digital eXtended-Capacity (SDXC) card
• Secure Digital (SD) card
• Secure Digital High-Capacity (SDHC) card
Note: Your computer does not support the content protection for recordable media (CPRM) feature
for the SD card.
The smart card reader on your computer only supports the smart card of the following specifications:
Do not insert smart cards with slits into your computer. Otherwise, the smart card reader might get damaged.
Attention: While transferring data to or from a flash media card, or a smart card, do not put your computer
into sleep or hibernation mode before the data transfer is completed; otherwise, your data could get
damaged.
Installing a flash media card or a smart card
Attention: Before you start installing a card, touch a metal table or a grounded metal object. This action
reduces any static electricity from your body. The static electricity could damage the card.
To install a card, do the following:
1. Ensure that the card is correctly oriented.
2. Insert the card firmly into the 4-in-1 media card reader slot or smart card reader slot.
If the plug-and-play feature is not enabled for the installed flash media card, do the following to enable
the feature:
1. Open Control Panel.
2. Click Hardware and Sound.
3. Click Device Manager. If you are prompted for an administrator password or confirmation, type the
password or provide confirmation.
• Length: 85.60 mm (3.37 inches)
• Width: 53.98 mm (2.13 inches)
• Thickness: 0.76 mm (0.03 inch)
.
Chapter 2
Using your computer
33
Advertisement
Table of Contents
