Symbol PDT 8000 Series Quick Reference Manual page 28

P D T
w i t h
2 0 0 3
Problem
Your terminal
does not accept
scan input.
8 0 0 0
W i n d o w s
f o r
Cause
Scanning applica-
tion is not loaded.
Unreadable bar
code.
Distance between
exit window and bar
code is incorrect.
Terminal is not pro-
grammed for the bar
code.
Terminal is not pro-
grammed to gener-
ate a beep.
Battery is low.
S e r i e s
M o b i l e
P o c k e t
Solution
Verify that the unit is loaded with a
scanning application. See your Sys-
tem Administrator.
Ensure the symbol is not defaced.
Ensure you are within proper scanning
range.
Ensure the terminal is programmed to
accept the type of bar code you are
scanning.
If you are expecting a beep on a good
decode and don't hear one, check that
the application is set to generate a
beep on good decode.
If the scanner stops emitting a laser
beam when you press the trigger,
check your battery level.
Note: If the scanner is still not reading
symbols, contact your distributor or
Symbol Technologies.
26
P C s