Copying Both Sides Of Cards Onto One Side (Id Card Copy) - Canon i-SENSYS MF3010 User Manual

Copying Both Sides of Cards onto One Side (ID Card Copy)

You can copy both sides of cards onto one side.
<Before copying>
If the [
] to reset the copy settings.
If a key is not pressed for 2 minutes, the copy settings will be automatically reset.
NOTE
You can copy with combined the functions.
"Registering the Quantity that You Frequently Copy (Up to Twenty-nine Copies)"
"Adjusting the Density"
"Selecting Copy Type (Speed Priority/Resolution Priorlty)"
"Emphasizing the Outline of an Image (Sharpness)"
Changing the copy ratio
The output size is the same as the documents (100%).
Paper size requirements
A size larger than A4 or Letter.
Operating results
1
2
] indicator is on or other than [1] is displayed, the previous copy settings are remained.In this case, press [
Operating procedures
Place the card on the platen glass, and then close it.
Place the card to align the center of the card with the arrow mark.
If you want to
arrange the cards
horizontally
If you want to
arrange the cards
vertically
Place the card with a 5 mm space created from the left edge of the
platen glass.
Place the card to fit in the left half of the platen glass.
Press [ ] or [ ] to specify the copy quantity.
Specify the copy quantity first.
You can set the copy quantity to "F" or "1" to "9."
You can register the custom copy quantity (user-defined number up to
twenty-nine copies) to "F." The pre-defined settings comes useful if you
copy a certain number of quantity, or want to copy more than 10 sets.
"Registering the Quantity that You Frequently Copy (Up to Twenty-
030E-02A