Roland Fa 06 Quick Start Manual page 7

3 4
Number Area Name
[SEQUENCER] button
[SONG SELECT] button
[LOOP] button
[ ] button
7 SEQUENCER
[ ] [
[ ] button
[ ] button
[ ] button
[PAD UTILITY] button
[SAMPLING] button
8
SAMPLER
[CLIP BOARD] button
[BANK] button
[HOLD] button
Pads [1]–[16]
9
[VOLUME] knob
[DAW CONTROL] button
[SPLIT] button
[DUAL] button
10 KEYBOARD
[TRANSPOSE] button
OCTAVE [DOWN] [UP] buttons
[S1] [S2] buttons
11 Controller
Pitch bend/modulation lever
5 6 7
Explanation
Accesses the SEQUENCER screen.
Selects a song.
Loops the song playback or overdubbing.
Moves the song position to the beginning. If you press this button during playback,
the position returns to the beginning of the song and playback stops.
Moves the song position to the first beat of the previous/next measure.
] buttons
Stops song playback or recording.
Plays the song.
Enters the record-standby state.
Displays the status of the samples, and lets you edit or import them.
Functions other than the sampler can also be assigned.
Lets you sample.
Lets you move or copy a sample from one pad to another.
Switches the pad bank.
Causes the sample to continue playing.
Play the samples assigned to each pad.
Adjusts the volume that is output from the MAIN OUTPUT jacks and the PHONES jack.
Lets you use this unit as a DAW controller.
Turns the split function on/off.
Turns the dual function on/off.
Hold down this button and use the OCTAVE [DOWN] [UP] buttons to raise or lower
the pitch range in semitone steps.
Raise or lower the pitch range in steps of an octave.
Various parameters or functions can be assigned to these buttons.
Hold down the [SHIFT] button and press one of these buttons to access a screen that
lets you assign a function.
Varies the pitch or applies vibrato.
8
Page
p. 22
p. 21
p. 21
p. 21
p. 22
p. 19
p. 20
p. 19
p. 9
p. 25
p. 12
p. 12
p. 12
p. 12
p. 14
5