Assembly - NordicTrack EX 1000 NTEL4255.1 User Manual

ASSEMBLY

Assembly requires two persons. Set the elliptical exerciser in a cleared area and remove all packing materials.
Do not dispose of the packing materials until assembly is completed. Assembly can be completed using the in-
cluded hex keys and your own adjustable wrench .
Use the drawings below to identify the small parts used for assembly. The number in parentheses below each
drawing is the key number of the part, from the PART LIST on page 24. The number following the key number is
the quantity needed for assembly. Note: Some small parts may have been preassembled. If a part is not in
the parts bag, check to see if it has been preassembled.
M8 Small M10 Split Wave Washer M10 Washer M8 Washer
Washer (85)–20 (88)–4
(67)–14
Washer (18)–4 (69)–4
M4 x 16mm M4 x 19mm M8 x 19mm Button M8 Nylon M10 Nylon
Screw (47)–6 Screw (57)–2 Screw (56)–4 Locknut (72)–4 Locknut (70)–2
M10 x 13mm Button
M8 x 38mm Button M8 x 55mm Bolt
Screw (54)–14
Bolt (58)–4 Set (92)–2
M10 x 25mm Patch M10 x 65mm Bolt
Screw (48)–4 Set (94)–2
M10 x 116mm Carriage Bolt (38)–2
M10 x 123mm Button Screw (87)–2
Thrust Washer
(66)–4
5