Maintenance And Troubleshooting - NordicTrack CX 998 NEL7095.2 User Manual

MAINTENANCE AND TROUBLESHOOTING

Inspect and properly tighten all parts of the elliptical
exerciser regularly. Replace any worn parts immedi-
ately.
For smooth
operation of the
elliptical exer-
ciser, inspect
and clean the
ramp regularly
using a soft
cloth and mild
detergent.
Other parts of
the elliptical
exerciser can
also be cleaned
in this way.
Keep liquids off the console. Never use abrasives
or solvents.
PULSE SENSOR TROUBLESHOOTING
If the handgrip pulse sensor does not function proper-
ly, see step 5 on page 12.
HOW TO CALIBRATE THE INCLINE SYSTEM
If the elliptical exerciser's ramp does not function prop-
erly, press one of the 1 Step Ramp buttons; while the
ramp is moving, unplug the power cord. When the
power cord is plugged back in, the elliptical exercis-
er's incline system will automatically calibrate itself.
During the calibration process, three dashes (– – –)
will appear in the console display while the ramp
moves to the highest position and then returns to the
lowest position.
HOW TO MOVE THE ELLIPTICAL EXERCISER
Stand in front of the elliptical exerciser, hold the han-
dlebars firmly, and place one foot against the ramp in
the location shown below. Pull the handlebars until
the elliptical exerciser can be moved on the front
wheels, and carefully move the elliptical exerciser to
Ramp
the desired location. Then, place one foot against the
ramp and lower the elliptical exerciser. Due to the
size and weight of the elliptical exerciser, use
extreme caution while moving and lowering it.
Wheel
HOW TO LEVEL THE ELLIPTICAL EXERCISER
If the elliptical
exerciser rocks
during use, turn
one or both of
the leveling feet
under the rear
stabilizer until
the rocking
motion is elimi-
nated.
21
Handlebars
Place your
foot here
Wheel
Leveling
Foot