NordicTrack Competition 831.15718.0 User Manual page 14

ADJUSTING THE SAFETY SPOTTERS AND THE
WEIGHT RESTS
Before using your barbell (not included), set the
Safety Spotters (17) at the lowest point to which you
want your barbell to move. Note: The weight bench is
designed to be used only with Olympic weights.
To adjust each Safety Spotter (17), hold the Safety
Spotter and pull out the attached Upright Pin (41).
Move the Safety Spotter to the desired height, and
insert the Upright Pin into the Safety Spotter and one
of the adjustment holes in the Upright (4 or 5).
Adjust the two Weight Rests (16) in the same way.
WARNING:
Safety Spotters (17) to the same height and
both Weight Rests (16) to the same height.
Do not put more than 310 lbs. (141 kg) on the
Weight Rests or the Safety Spotters.
Always adjust both
16
17
14
41
5
41
16
4
17