Related Manuals for SenTech STC-C42A
Summary of Contents for SenTech STC-C42A
-
Page 1: Product Specification
STC-C42A (1/2” CCD) STC-C43A (1/3” CCD) Product Specification Small Cubic Type CCIR High-Resolutions Monochrome Analog Camera... -
Page 2: Safety Precautions
STC-C42A (1/2” CCD) STC-C43A (1/3” CCD) Safety Precautions For U.S.A. For U.S.A. CAUTION CAUTION Warning: Warning: For U.S.A. CAUTION RISK OF ELECTRIC SHOCK Warning: This equipment generates and uses radio frequency energy and if RISK OF ELECTRIC SHOCK This equipment generates and uses radio frequency energy and if... -
Page 3: Table Of Contents
STC-C42A (1/2” CCD) STC-C43A (1/3” CCD) Contents I. Specifications A. Electronic Specs / Mechanical Specs / Environmental Conditions……………. B. Rear Panel Specifications………………………………………………………………………………… 1. Connector Pin Assignment…………………………………………………………………….. 2. DIP Switch Settings……………………………………………………………………………………. 3. External Sync……………………………………………………………………………………………….. 4. Gain Mode Setting………………………………………………………………………………………. II. Dimensions A. Dimensions…………………………………………………………………………………………………………….. -
Page 4: Specifications
STC-C42A (1/2” CCD) STC-C43A (1/3” CCD) I. Specifications A. Electronic Specifications / Mechanical Specifications / Environmental Conditions Specification Manual 1 of 7 Rev 1.1... -
Page 5: Rear Panel Specifications
STC-C42A (1/2” CCD) STC-C43A (1/3” CCD) B. Rear Panel Specifications 1. Connector Pin Assignment 12 Pin Connector DIP Switch Gain Mode Switch Manual Gain Pot External Sync (HD/VD) Signal Impedance Switch Figure 1 12 Pin Connector Assignment The connector type: HR10A-10R-12PB (Hirose) or equivalent... -
Page 6: Dip Switch Settings
STC-C42A (1/2” CCD) STC-C43A (1/3” CCD) 2. DIP Switch Settings (Refer to Dip Switch in Figure 1) DIP Switch No. 1 to 4: Shutter Speed DIP Switch No. 5 to 7 : No Function DIP Switch No. 8: Gamma Figure 3 DIP Switch No.9: Sync. -
Page 7: External Sync
STC-C42A (1/2” CCD) STC-C43A (1/3” CCD) 3. External Sync. (HD/VD) signal impedance setting (See External Sync. in Figure 1) 75Ohm termination OFF: High impedance 4. Gain Mode Setting (See Gain Mode Switch in Fig. 1) FIX: Fixed gain MAN: Manual gain The gain can be adjustable by the manual gain pot (See Manual Gain Pot in Fig. -
Page 8: Dimensions A. Dimensions
STC-C42A (1/2” CCD) STC-C43A (1/3” CCD) II. Dimensions A. Camera Dimensions Unit: mm Specification Manual 5 of 7 Rev 1.1... -
Page 9: Dimensions (Tripod)
STC-C42A (1/2” CCD) STC-C43A (1/3” CCD) B. Tripod Dimensions Tripod screw depth 5.5 33.5 2-M4 (P=0.7) depth 5.5 (R13.8) Unit: mm Specification Manual 6 of 7 Rev 1.1... -
Page 10: Dimensions (Camera With Tripod)
STC-C42A (1/2” CCD) STC-C43A (1/3” CCD) C. Camera with Tripod Dimensions Unit: mm Specification Manual 7 of 7 Rev 1.1... - Page 11 STC-C42A (1/2” CCD) STC-C43A (1/3” CCD) Revisions Revision Date (D/M/Y) Changes Name Changes 26/10/2006 New Document Sam Aimono 12/05/2008 Edited English Michelle Campbell Specification Manual Rev 1.1...
- Page 12 STC-C42A (1/2” CCD) STC-C43A (1/3” CCD) Sensor Technologies America, Inc. 1345 Valwood Pkwy, Suite 320 Carrollton, Texas 75006-6891 TEL (972) 481-9223 FAX (972) 481-9209 http://www.sentechamerica.com/ Sensor Technology Co., Ltd. 7F, Harada Center Building 9-17, Naka cho 4chrome Atsugi-city, Kanagawa 243-0018 Japan TEL +81-46-295-7061 FAX +81-46-295-7066 http://www.sentech.co.jp/...
Need help?
Do you have a question about the STC-C42A and is the answer not in the manual?
Questions and answers