Table of Contents
Advertisement
a The ducting can also be connected at the back or to the left-hand side.
b 222 x 89 mm flat exhaust ducting can be used as an alternative for ducting to
the rear or to the side.
c The cooker hood is secured in the cut-out by clamps. This requires a solid
installation surface, such as wood. Make sure that the material is strong
enough to bear the weight of the cooker hood. There must be a minimum
distance of 25 mm between the areas around the clamps and any structures or
components, such as struts or cables.
Safety distance between hob and cooker hood (S)
When planning the installation height of your cooker hood, the minimum safety
distance between the top of a cooker or hob and the bottom of the cooker
hood is as follows, unless a greater distance is specified by the manufacturer of
your cooking appliance.
See "Warning and Safety" instructions for further information.
Cooking appliance
Electric hob
Electric grill, deep fat fryer (electric)
Multi-burner gas hob,
total output ≤ 12.6 kW, no burner > 4.5 kW
Multi-burner gas hob,
total output > 12.6 kW and ≤ 21.6 kW,
no burner > 4.8 kW.
Multi-burner gas hob,
total output > 21.6 kW,
or multi-burner gas hob where one burner > 4.8 kW.
Single burner gas hob, output ≤ 6 kW.
Single burner gas hob, output > 6 kW and ≤ 8.1 kW.
Single burner gas hob, output > 8.1 kW
Installation
Minimum distance S
450 mm
650 mm
650 mm
760 mm
Not possible
650 mm
760 mm
Not possible
39
Advertisement
Table of Contents
