Table of Contents
Advertisement
a Ducting upwards or to the rear
b Cut-out for cooker hoods with hard-wired power connection rather than a plug
c An exhaust ducting cut-out with 200 mm ensures sufficient space through
the wall for the exhaust ducting to flex
d Ventilation grille for recirculation mode. The distance to the ceiling or to furniture
installed above the appliance should be at least 300 mm.
Exhaust duct 150 mm
Please observe the installation positions for the socket and for the ducting cut-out
shown on the relevant drawings when using the DADC 1000 tower.
e Clearance between hob lighting and rear wall
Safety distance between hob and cooker hood (S)
When planning the installation height of your cooker hood, the minimum safety
distance between the top of a cooker or hob and the bottom of the cooker hood
is as follows, unless a greater distance is specified by the manufacturer of your
cooking appliance.
See "Warning and Safety" instructions for further information.
Cooking appliance
Electric hob
Electric grill, deep fat fryer (electric)
Multi-burner gas hob,
total output ≤ 12.6 kW, no burner > 4.5 kW
Multi-burner gas hob,
total output > 12.6 kW and ≤ 21.6 kW,
no burner > 4.8 kW.
Multi-burner gas hob,
total output > 21.6 kW,
or multi-burner gas hob where one burner > 4.8 kW.
Single burner gas hob, output ≤ 6 kW.
Single burner gas hob, output > 6 kW and ≤ 8.1 kW.
Single burner gas hob, output > 8.1 kW
Installation
Minimum distance S
450 mm
650 mm
650 mm
760 mm
Not possible
650 mm
760 mm
Not possible
33
Advertisement
Table of Contents
