Read This Before Use; Operation; Step-By-Step Use; Cefar Easy Touch™ - Automatic Amplitude Setting (Auto) - cefar myo X2 User Manual

READ ThIS BEFORE USE

To reach your goal and get the most effective training the stimulation should
feel strong but without pain. Since the body initially adapts to the selected
intensity of the stimulation, it is necessary to adjust the amplitude gradually to
reach the optimal level of stimulation.
CEFAR EASY TOUCh™ - AUTOMATIC AMPLITUDE SETTING (AUTO)
By using CEFAR EASY TOUCH™ the amplitude is automatically set and adjusted
during the program, related to the result of the analyse in the TEST that is
automatically done when you use the auto mode.
To get the most effective training the amplitude increases gradually during the
program. You can leave auto mode any time by pressing the arrow buttons;
or .
AUTO AUTO
AUTO AUTO
S
P P S
2526_CEFAR_MYO.ACTIV_X2__ENG_3-17 7
OPERATIONW

STEP-BY-STEP USE

1. Connect the electrodes to a cable.
2. Attach the electrodes to your body.
Follow the recommendation in Electrode Placement Guide , at the end
of this user manual.
3. Connect the cable to one of the stimulator's two channels.
4. Press to turn the stimulator on.
5. Press to select the stimulation for muscles on upper or lower
body.
AUTO AUTO
AUTO AUTO
S
P
6. Press until desired program number is shown.
S
P
More information about each program and its level is found in the section
Program Description .
Note! The program can only be changed or selected when the amplitude is
0.0 mA.
To start the training see 'CEFAR EASY TOUCH™ – Automatic Amplitude Setting
(AUTO)' (recommended) or 'Manual Mode'.
CEFAR EASY TOUCh™ – AUTOMATIC AMPLITUDE SETTING (AUTO)
Prepare the equipment as described in Step-by-Step Use , step 1-6
7. Press to start the auto test.
AUTO AUTO
P S
AUTO starts flashing and the amplitude increases gradually.
8. Press once again when you see the first visual muscle response.
AUTO AUTO
S
P

2006-07-07 11:09:57