Performance And Specifications - Focusrite rednet am2 User Manual

PERFORMANCE AND SPECIFICATIONS

Line Level Outputs
All measurements taken at +24dBu reference level, maximum gain, R
0 dBFS Reference Level
Frequency Response
THD + N
Dynamic Range
Crosstalk
(Output to Output)
Headphone Output
All measurements taken at +19dBm reference level, maximum gain, R
0 dBFS Reference Level
Frequency Response
THD + N
Dynamic Range
Output Impedance
Headphone Impedance
Crosstalk
(Output to Output)
Digital Performance
Supported sample rates
Clock Sources
Connectivity
Front Panel
Headphone
Rear Panel
Line Output
PSU (PoE and DC)
Network
+18 or +24 dBu (switchable)
20Hz – 20kHz ±0.5dB
<-100dB (0.001%) unweighted, 20Hz - 20kHz; -1dBFS input
120dB 'A'-weighted (typical), 20Hz - 20kHz
<-100dB unweighted, 20Hz - 20kHz; -20dBFS input
+19dBm
20Hz – 20kHz ±0.5dB
<-100dB (0.001%) unweighted, 20Hz - 20kHz; -1dBFS input
118dB 'A'-weighted (typical), 20Hz - 20kHz
5Ω
32Ω – 600Ω
<-90dB unweighted, 20Hz - 20kHz; -20dBFS input
44.1 / 48 / 88.2 / 96 kHz (-4% / -0.1% / +0.1% / +4.167%) at 24 bit
Internal or from Dante Network Master
1/4" stereo Jack socket
2 x XLR-3 male
1 x PoE (Network Port 1) Input and 1 x DC 12V Barrel Input Connector.
2 x etherCON, also compatible with standard RJ45 connectors
= 100kΩ
L
= 600Ω
L
13