Table of Contents
Advertisement
6.
CONFIGURATOR SW
The Configurator software is an accessory product for Nokia GSM Connectivity
Terminals. It is used to modify the basic settings of the terminal so that the
connection to the GW can be established. The following settings can be
configured:
•
GSM security settings
•
GSM network settings
•
GSM WAP parameter settings
A PC or laptop and an RS-232 serial cable are needed when configuring the
terminal.
One of the Nokia GSM Connectivity Terminals used with the Nokia M2M ADK is
used as a data modem in the server side and the other one is used in the M2M
system mode at the terminal end connected to the evaluation module.
Instructions on how to configure these terminals can be found in the Installation
Guide for Nokia M2M Application Development Kit that is included in the Nokia
M2M ADK documents.
15/21
Advertisement
Table of Contents
