List Of Messages - Canon HR10 Instruction Manual

Additional Information
Printing
Problem
The printer is not operating even
though the camcorder and printer are
correctly connected.
Others
Problem
A rattling can be heard from the
camcorder.

List of Messages

Message
CHANGE THE BATTERY PACK
CANNOT ENTER THE
STANDBY MODE NOW
UNABLE TO RECOGNIZE THE
RECORDING MODE OF THE DISC
• TEMPERATURE TOO HIGH
CANNOT RECORD
• TEMPERATURE TOO HIGH
CANNOT REMOVE DISC
• CANNOT RECORD
• CANNOT RECORD
CHECK THE DISC
REACHED THE MAXIMUM
NUMBER OF SCENES
CANNOT PLAY DISC
Downloaded From VideoCamera-Manual.com Manuals
106
Disconnect the USB cable and turn off the camcorder and the printer. After
a short while, turn them on again, set the camcorder to
and restore the connection.
The internal lens fixture can move when the camcorder is turned off. This
is not a malfunction.
Battery pack is exhausted. Replace or charge the battery pack.
The camcorder cannot enter the standby mode while the disc is being
recognized after first inserting it or if the remaining battery charge is too low.
You inserted a type of disc not supported by this camcorder.
The disc may not be recognized by this camcorder if it was initialized or
recorded using a different device.
You inserted a disc recorded in a different television system (PAL or SECAM).
The camcorder has exceeded its operational temperature. Disconnect the
compact power adapter and remove the battery pack. Let the camcorder cool
down before resuming use.
There is a problem with the disc. Replace the disc.
This message can also appear if condensation has formed. Wait until the
camcorder dries completely before resuming use.
The disc's recording surface may be dirty or scratched.
The maximum number of scenes has been reached. Delete some recordings
(DVD-RW in HD quality, or SD quality (VR mode)) to free some space or replace
the disc.
The disc is dirty or you attempted to play back a type of disc not supported by
this camcorder.
This message can also appear if condensation has formed. Wait until the
camcorder dries completely before resuming use.
Solution
Solution
Explanation
–
mode
–
23
39
5
–
–
–
32
114
–
43
5
114