Canon HR10 Instruction Manual page 49

IMG STAB
Mode switch: P
[ ON ], [
The image stabilizer compensates for
camcorder shake even at full telephoto.
• The image stabilizer is designed to
compensate for a normal degree of
camcorder shake.
• The image stabilizer cannot be turned
off when the mode switch is set to
AUTO.
• We recommend setting the image
stabilizer to [
tripod.
FRAME RATE
Mode switch: P
Disc quality: HD only
[ 60i NORMAL],
[ 24F PROGR.]
Selects the frame rate to be used when
recording in HD quality.
[ 24F PROGR.]: 24 frames per
second, progressive. Using this frame
rate will give your recordings a cinematic
look. When combined with the [
MODE] recording program (
cinematic look will be enhanced.
This frame rate is different from the 24F
mode featured in Canon HDV
camcorders.
AF AST LAMP
[ AUTO], [
Downloaded From VideoCamera-Manual.com Manuals
OFF]
OFF] when using a
CINE
55), the
(
OFF]
FOCUS PRI.
Mode switch: P
[ ON:AiAF], [
[ OFF]
REVIEW
[ OFF], [
[ 6 sec], [
Selects the time to display a still image
after it has been recorded on the
memory card.
• This menu item will not be available
when the drive mode (
[ CONT.SHOOT.], [
CONT.SHOOT.] or [
• If you press
still image it will continue to be
displayed indefinitely. Press
halfway to return to the normal
display.
WIDESCREEN
Disc quality: SD only
[ ON], [
SELF TIMER
[ ON
78)
ON:CENTER],
2 sec], [ 4 sec],
8 sec], [ 10 sec]
79) is set to
HISPEED
AEB].
DISP.
while reviewing a
OFF]
], [ OFF]
( 80)
PHOTO
( 37)
( 59)
49