Canon HR10 Instruction Manual page 103

Problem
START/STOP
Pressing
recording.
Even after stopping recording, the
DISC access indicator does not go off.
START/STOP
The point where
pressed does not match the
beginning/end of the recording.
The recording suddenly stops shortly
after starting recording.
Camcorder will not focus.
Sound is distorted.
Viewfinder picture is blurred.
Playback/Editing
Problem
Pressing the playback button does
not start playback.
• During playback there is video
noise and the sound is distorted.
• The disc cannot be read.
Downloaded From VideoCamera-Manual.com Manuals
will not start Set the camcorder to
Load a recommended disc.
The disc is full ("
(DVD-RW in HD quality, or SD quality (VR mode)) to free some space or
replace the disc.
The camcorder has exceeded its operational temperature. Turn off the
camcorder and let it cool down before resuming use.
Remove the disc protection.
Unfinalize the disc (DVD-RW in HD quality, or SD quality (VIDEO mode)).
The scene is being recorded on the disc. This is not a malfunction.
was There is a slight interval between pressing
of recording on the disc. This is not a malfunction.
The disc is dirty. Clean the disc with a soft lens-cleaning cloth. If the
problem persists replace the disc.
The camcorder has exceeded its operational temperature. Turn off the
camcorder and let it cool down before resuming use.
Autofocus does not work on the subject. Focus manually.
Adjust the viewfinder with the dioptric adjustment lever.
Lens is dirty. Clean the lens with a soft lens-cleaning cloth. Never use
tissue paper to clean the lens.
When recording near loud sounds (such as fireworks or concerts), sound
may become distorted. This is not a malfunction.
Adjust the viewfinder with the dioptric adjustment lever.
Load a disc.
Set the camcorder to
Do not insert into the camcorder discs that were initialized, recorded or
edited using another DVD device.
If using a single-sided disc, check that the disc is inserted with the label
side facing up.
The camcorder has exceeded its operational temperature. Turn off the
camcorder and let it cool down before resuming use.
The disc is dirty. Clean the disc with a soft lens-cleaning cloth.
Do not insert into the camcorder discs that were initialized, recorded or
edited using another DVD device.
Solution
mode.
END" appears on the screen). Delete some recordings
START/STOP
Solution
mode.
35
7
43
–
66
71
35
and the actual start –
111
–
59
36
113
–
36
32
41
–
32
–
111
–
103