Canon HR10 Instruction Manual page 109

Hide thumbs Also See for HR10:
Table of Contents

Advertisement

Message
INK ERROR
NO INK
LOW INK LEVEL
INK ABSORBER FULL
• FILE ERROR
• CANNOT PRINT!
COULD NOT PRINT X IMAGES
SET
PRINT ORDER
PRINT ORDER ERROR
CANNOT TRIM
READJUST TRIMMING
PRINTER ERROR
PRINT ERROR
HARDWARE ERROR
COMMUNICATION ERROR
CHECK PRINT SETTINGS
INCOMPATIBLE PAPER SIZE
PRINTER IN USE
PAPER LEVER ERROR
PRINTER COVER OPEN
NO PRINTHEAD
Downloaded From VideoCamera-Manual.com Manuals
There is a problem with the ink. Replace the ink cartridge.
The ink cartridge is not inserted or is out of ink.
The ink cartridge needs to be replaced soon. Select [CONTINUE] to restart printing.
Select [CONTINUE] to resume printing. Consult a Canon Service Center (refer to the list
included with the printer) to replace the ink absorber.
You attempted to print an image that was recorded with another camcorder, has a
different compression, or was edited on a computer.
You attempted to use the print order settings to print X images that were recorded with
another camcorder, with a different compression or were edited on a computer.
No still image on the memory card has been marked with a print order.
You attempted to set more than 998 still images in the print order.
You attempted to trim an image that was recorded with another camcorder.
You changed the [PAPER] settings after applying the trimming settings.
Cancel printing. Turn off the printer and turn it back on. Check the printer status. If the
error still persists, refer to the printer's instruction manual and contact the appropriate
customer support center or service center.
Cancel printing, disconnect the USB cable and turn off the printer. After a while, turn the
printer back on and reconnect the USB cable. Check the printer status.
When you are printing using the
Cancel printing. Turn off the printer and turn it back on. Check the printer status. If the
printer is equipped with a battery, it might be exhausted. In such case, turn off the
printer, replace the battery and turn it back on.
The printer is experiencing a data transfer error. Cancel printing, disconnect the USB
cable and turn off the printer. After a while, turn the printer back on and reconnect the
USB cable. When you are printing using the
Or, you attempted to print from a memory card that contains a large number of images.
Reduce the number of images.
Current print settings cannot be used for printing with the
The paper settings of the camcorder conflict with the printer's settings.
The printer is in use. Check the printer status.
Paper lever error occurred. Adjust the paper selection lever to the proper position.
Close the printer cover securely.
No print head is installed in the printer or the print head is defective.
Explanation
button, check the print settings.
button, check the print settings.
button.
109

Advertisement

Table of Contents
loading

Table of Contents