Canon HR10 Instruction Manual page 94

External Connections
Standard Definition TV Sets
Terminal on the
Camcorder
3
Output connection (signal flow
Playback on a TV Screen
This section explains how to play back
the disc with this camcorder by
connecting it to a TV. To play back the
disc with another DVD device refer to
Disc Playback on an External Device
( 68).
The quality of the playback picture will
vary depending on the connected TV
and the type of connection used.
POINTS TO CHECK
Change the following settings as
necessary before making the
connections.
- [TV TYPE] to match the output video to
the aspect ratio of the connected TV
( 53).
- [COMP.OUT] to select the output video
specifications when using connection
type ( 54).
1
Downloaded From VideoCamera-Manual.com Manuals
94
Connecting Cable
) to a TV or VCR with AV terminals.
STV-100 Stereo Video Cable
(supplied)
Connecting
Connect the camcorder to the TV
following one of the connection
diagrams shown in the previous section
Connection Diagrams (
Playback
1
Turn on the camcorder and the
connected TV or VCR.
On a TV: Select as the video input
the same terminal to which you
connected the camcorder.
On a VCR: Set the input selector to
the external video input (usually
labeled LINE IN).
( 26)
2
Start the playback of the movies
(
• Sound from the built-in speaker will be
muted while the STV-100 Stereo Video
Cable is connected to the camcorder.
• We recommend powering the
camcorder using the compact power
adapter.
Terminal on the
Connected Device
Yellow
White
Red
41) or still images (
NOTES
VIDEO
AUDIO
L
R
93).
75).