Surveillance Software Gui; Gui; Warranty - Foscam FI8904W User Manual

Infrared LED: 24 IR LEDs (model 04)/60 IR LEDs (model 05)
LENS: CMOS sensor with fixed focus lens
WIFI Antenna: Wireless Antenna
Back View
LAN: RJ-45/10-100 Base T
Power: DC 5V/2A Power supply
RESET BUTTON:
1) Press and hold down the RESET BUTTON for 10 seconds. Release the power button and IP
camera will be reset back to the factory default parameter.
2) Press and hold down the RESET BUTTON about 4 seconds, then press the WPS button on
the router, then you can use the WPS function. (For more details: please read Wireless Settings
in the User Manual)
Bottom View
There are some labels located on the body of the camera; this is an important feature of original
Foscam cameras. If your camera does not have labels, it may be a clone one. Cloned Foscam
cameras can not use original firmware and are not eligible for warranty or technical services.
2 Surveillance
2 Surveillance
Please refer to the Quick Installation Guide if you install the camera at first time. After finishing
quick installation, you can take time to learn the operation of the software.
Shenzhen Foscam Intelligent
Shenzhen Foscam Intelligent
Tel: Tel: 86 86 755 755 2674 2674 5668 5668 Fax: Fax:
Figure 1.2
Software

GUI

Software GUI
Technology Co., Limited
Technology Co., Limited
86 86 755 755 2674 2674 5168 5168
w ww.foscam.co
w ww.foscam.co
5
m
m
5